Air Conditioning Design: Choosing the Appropriate System for Your Home

Air conditioning has become a standard appliance in many homes. Knowing which design to select for a new installation or replacement is important to ensure your selection matches area conditions as well as the needs of your home. Air conditioning design accomplishes three main functions. It provides a source for supplying cold air, distribution to a space, and temperature regulation. In a typical home setting, both units share distribution and control methods. A cooling system removes warm air from a space and then forces cool air into the same space. These units typically run on electricity whereas a heater may use fuel instead. A heat pump is the main component for exchanging air. Depending on the portion being utilized, it may pull either out of the home to supply the opposite. Cooling units use a liquid gas commonly referred to as refrigerant. This gas is utilized by the coils to decrease the temperature. After this process, it is then reintroduced through the ductwork and registers. This is a very basic explanation of how these elements work together to create a cooler home. There are many systems available to do the job. Selecting the right setup will increase effectiveness throughout the space.

HVAC Replacement: An Overview of Forced Air Options

HVAC replacement for homes typically involves a forced air system. In these designs, an electric fan also called a blower sends air through ductwork to the registers throughout your home. Warm air is pulled through the return system, cooled by the unit, and then distributed back into the space. Blower malfunctions are one of the most common problems with this design. These units have many varying designs including:

Single Package Units
Split Systems
Ductless Air Conditioners
Portable Units

A single package unit is commonly applied to industrial settings. All components are together and reside on the roof or a building wall. Split systems are the most common design used in homes. The noisy components are placed outside the home for transfer through ductwork. Internal components must also be installed. This design allows a space to be cooled consistently with less noise. Ductless designs may be chosen for HVAC replacement where ductwork is not in place. They can be effective in homes with more open floor plans, but often cannot cover an entire structure. Noisy parts remain outside while the area around the unit is cooled effectively. Portable systems can be put in place to cool a specific room or outside structure. They are an economical option for areas which not connected to central cooling.

Bardi technicians can help you decide which air conditioning design is best for your current cooling requirements. You may be restricted by your current home cooling setup. For example, not having ductwork in place may make a central system more expensive to install. Speaking with a qualified technician as well as obtaining an initial evaluation makes it easier to know your options. Our professionals are available twenty-four hours a day to assist with all repair and replacement needs. Call us today to see how we can help you get the desired home comfort.


Article Categories